On the Wrangler TJ, coil springs and shocks are primary determining factors in ride quality and suspension performance. Skyjacker 2-Stage Variable Rate Springs deliver a smooth controlled comfortable ride.
First Flex Rate stage delivers a comfortable ride with the ability to flex\expand during full articulation as the suspension drops (full droop). This keeps the coil springs seated in the upper coil mount\bucket and the tires in contact with the terrain. Second Ride Rate stage only engages after compression past Flex Rate.
Skyjacker’s ADX 2.0 Adventure Series Remote Reservoir Aluminum Monotube Shocks deliver modern technology in the design with an innovative off-road race-inspired full-displaced Custom Valve Tuned system. With this highest level of technology development, ADX 2.0 provides consistent dampening, high-end performance, cooler running, more control and improved driving comfort.
Skyjacker’s ADX 2.0 shocks dampen out (control) the unwanted oscillation motion to improve handling and ride quality. ADX 2.0 will optimize your suspension by keeping your tires in contact with the terrain. Engineered for higher speed applications, remote reservoir shocks still perform at crawl. Truthfully, we actually spend way more time on our daily commutes than we spend on the trails. The commutes are neither smooth surfaces or free of obstacles. Quick starts, up and down acceleration and hard stops are a daily routine.
The external remote reservoir separates the nitrogen gas from the oil with an Internal Floating Piston (IFP). ADX 2.0 constant controlled resistance performance prevents lag (decline) or fade (failure). The high-pressure nitrogen gas Custom Valve Tuning and IFP technology combine to create the fastest responding shock ever. The separate reservoir allows more room in the shock cylinder to increase the oil capacity. The large bore size design reacts quicker and creates the smoothest ride possible. The Teflon banded piston’s smooth reaction delivers a superior ride and adds stability on any terrain.
Impact extruded CNC machined T6061-T6 aluminum monotube dissipates heat and runs cooler versus traditional steel-bodied shocks. The overall weight of the aluminum body and aluminum remote reservoir setup is lighter too. The superior construction of Skyjacker’s ADX 2.0 will conquer off-road and on-road challenges through all manner of terrain, obstacles and extreme weather. Load up, set your waypoint where X marks the spot and confidently conquer your next adventure to the far end of the trail and back again.
Longer Replacement Front and Rear Lower Control Link Arms correct caster angle. Formed from 2-inch OD x 0.250 wall DOM tubing, both pairs of fixed length arms with pressed-in OEM style steel encased rubber bushings at the frame and the axle mounts.
A tubular Transfer Case Lowering Kit helps avoid drive shaft vibration by correcting proper driveline angle while retaining as much ground clearance as possible. Transfer Case Linkage Relocation Bracket included. Front and Rear Bump Stop Spacers prevent over-compression.
Rear Track Bar Lower Axle Mount Bracket corrects track bar angle to create better handling and a less side-to-side sway.
