null BuySafe Guarantee

MOPAR 68427796AA 3.09 Ratio ZF Limited Slip Differential for 15-23 Challenger, Charger R/T, SRT 392, R/T Scat Pack & SRT Hellcat

Product Code: 68427796AA
(2 reviews) Write a Review
MSRP: $1,115.00
$899.95
High Horse Performance is Veteran Owned & Operated
Description

Replace your Challenger or Chargers rear 2.62 geared differential with a "factory" MOPAR 3.09 ratio limited slip differential. This rear is a plug-n-play, direct bolt-in, no tuning required rear end. Install it and go race!

Replaces: 05038702AG, 5038702AD, 68269917AA, 68269917AB, 68269917AC, 68269917AD, 68269917AE, 68269917AF, 68269917AG

Applications:

  • 2015-2023 Charger R/T
  • 2015-2023 Charger SRT 392
  • 2015-2023 Charger SRT Hellcat
  • 2015-2023 Charger R/T Scat Pack
  • 2015-2023 Challenger R/T
  • 2015-2023 Challenger SRT 392
  • 2015-2023 Challenger SRT Hellcat
  • 2015-2023 Challenger R/T Scat Pack

WARNING: High Shipping Cost Item. This item, due to it's heavy weight carries with it a high shipping cost. We have attached a flat rate shipping fee for lower 48 States shipping. Please contact us for shipping quotes outside the CONUS. Due to this products high weight combined with the extremely high rate of damage during shipping this item regularly sees when shipped in the manufacturers original package we have chosen to repackage these differentials in UPS approved packaging utilizing foam expansion packs for the added protection these differentials require. This means we are adding on average well over $100.00 in just packaging materials alone which we have included in to our flat rate shipping price. This occasionally causes our price to be slightly higher than some of our low priced competitors who do not take the time to ensure your package arrives in one piece but with the high rate of damage these differentials sustain in shipping we feel this is the best way of addressing this concern to insure you receive your product without having issues taking you months to clear up. If you are able to pick up your differential at our Smyrna, DE location these shipping and packaging fees do not apply.

Questions & Answers
avatar
Powered by answerbase
Popular Questions

3 years ago
Im installing this 309 on a 2016 charger rt 5.7L and asking if it will bolt up in place of the stock 262 ? See more »
3 years ago
This 3.09 rear will bolt up in place of the factory 2.62 as long as your ZF rear has the same axle spline count as SRT/Scat Pack/ Hellcat vehicles.
0 | 0
3 years ago
3 years ago
These differentials are 38 tooth at the axle spline which is factory for Scatpack's and SRT8's, including Hellcats and RedEye's. The R/T's don't always have the 38 tooth count so you may need to replace additional parts, such as axles, in order to fit this differential. And tuning wise, because the 8-Speed transmissions use an output speed sensor on the transmission to determine vehicle speed you do not need to tune the transmission for a gear change - it compensates on it's own with no issues.
0 | 0
3 years ago
3 years ago
This rear will indeed fit any 2015+ year model Hellcat Charger or Challenger.
0 | 0
3 years ago
Which 309 is it See more »
3 years ago
The Redeye/SS is slightly beefier with additional cooling fins, hence the major price difference between the RedEye 3.09 and the standard 3.09. Typically the Redeye/SS rear is VIN locked by MOPAR as well making it extremely hard to get your hands on. We have run the standard 3.09 on Hellcats for years with a lot of success and when the standard 3.09 is not enough the recommended next step is into the Billet 3.09 which has been proven to hold up extremely well in our 1500 horsepower Hellcats at the track.
0 | 0
2 years ago
2 years ago
As long as the vehicle has a ZF style rear and not a Getrag this differential should fit.
0 | 0
3 years ago
3 years ago
This rear will only fit 2015+ ZF rear equipped vehicles with the correct SRT/Hellcat axle spline count, so will not work on a 2013 without a ZF rear cradle conversion. For a 2013 year model vehicle there are also the GETRAG conversion kits in a 3.06 gear ratio: https://highhorseperformance.com/mopa...
0 | 0
2 years ago
I have a 2015 challenger hellcat and the rear end diff needs replacement, does this come with everything I need to replace or do I need to buy additional parts for installation? See more »
2 years ago
This listing is only for the differential itself. Typically existing hardware can be reused upon installation, leaving no additional hardware required.
0 | 0
9 months ago
Will this part fit my car See more »
8 months ago
This 3.09 rear will bolt up in place of the factory 2.62 as long as your ZF rear has the same axle spline count as SRT/Scat Pack/ Hellcat vehicles.
0 | 0
6 months ago
6 months ago
This will not bolt into a rear cradle from 2014 or older models. It would require a cradle swap among a lot of other parts.
0 | 0
View all
view

2 Reviews