Designed to complement the JKS front Coil-over conversion kit for Jeep Wrangler JK, this rear system is just as strong, comprehensive and easy to install. The rear position kit accepts FOX 2.5" 10" travel Coil-overs -- including provisions to mount remote fluid reservoirs. In addition to the benefits of high-performance FOX shock valving, Coil-overs facilitate easy ride height adjustments and coil spring swaps for rate changes. The no-weld solution requires some cutting and drilling as described in the detailed instructions. Kit is designed as an upgrade for lifted JKs. Additional mods are necessary to correct suspension/driveline geometry on stock height JKs. Requires permanent cutting of the factory shock mounts. Includes powder coated driver's side and passenger brackets. Accepts FOX 2.5" 10" travel DSC Factory Race Coil-overs, FOX 884-06-177 recommended. Compare with other brands' Coil-over conversion kits that only accept 2" diameter Coil-overs.
- Complete bolt on bracket system to convert the rear JK coil spring suspension to a coilover
- Bracket system designed to accommodate Fox 2.5 coil-overs.
- The bracket design mounts off factory brackets (after some trimming) for precise location.
- All brackets powder coated the signature JKS semi-gloss black
Kit is designed as an upgrade for lifted JKs, if installing on a stock height JK additional modifications will be necessary to correct suspension/driveline geometry.
Requires cutting of the factory shock mounts and is not designed to allow the vehicle to go back to stock configuration.
Requires a minimum of 2" of additional rear bump stop height from factory (included with more lift kits)
Reservoir mounts are not designed to work with the factory rear bumper.
This part does NOT include the Coilovers
You will need to purchase part number: FOX 884-06-17
All JKS products are protected by a limited lifetime warranty to ensure they are free from manufacturer defects in material and workmanship so you can go with confidence knowing your JKS parts are covered.
