This Harness is required with HP or Dominator ECUs. Includes, 13' long, 10 AWG main power harness, Qty. (2) 3/8" ring terminals and shrink tube (not pictured) . The harness is fuse protected and covered in braided split loom for additional abrasion protection.
The Main Power Harness MUST be connected directly to the Battery terminals.
Do not connect them to any other location such as a disconnect switch, starter solenoid or distribution lug. The harness length is 13 feet. If you need to extend the length do so with 8 AWG or larger multi-strand wire.
