The best Hellcat crank pinning kit we sell. Remember - If you don't pin it, you will spin it! If you are using an aftermarket crank damper then you must pin your crank.
Fits all Supercharged 6.2L Hellcat based Gen 3 HEMI Engines.
Per Chrysler, if you remove the damper bolt, it requires you to replace the bolt, we now use the newer 6512335AA with a Torque Spec of 200Nm (147ft/lbs) plus an additional 150 degrees.
It worked out perfectly so far!
Awesome kit not to expensive but I think it should come with 2 pins automatically. Didn't have to update the crank bolt but I did because of my own technicality.... super fast shipping.would definitely do more business in the future if they have what I need at a reasonable price
Very well built tool- the bit i was skeptical of but it worked good as well... never broke one but did require slow speed drill to prevent burning.
Requires a compressor with enough chooch for a few minutes. Do not recommend a standard batter drill/impact as it will not have enough power. Kit worked as designed, crank is pinned, look forward to now adding a pulley and injectors.
WILL BUY MORE PARTS AND TOOLS FROM HHP.
