The Edelbrock #61119 Performer RPM cylinder head is a bolt-on performance upgrade for 2005-Present Gen 3 HEMI 6.1L, 6.2L, 6.4L engines. It's designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs and accessories, as well as Hellcat components. this cylinder head have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and heat treated to T6 specifications, machined and assembled at Edelbrock's facility in Torrance, California for guaranteed quality. The Edelbrock #61119 Performer RPM cylinder head features fully CNC machined combustion chambers along with CNC profiled bowls and port entries/exits for improved air flow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength. Extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock. Match with an Edelbrock Victor EFI #7179 intake manifold for the ultimate in Edelbrock Gen 3 HEMI performance.
Although Edelbrock Gen 3 Hemi Cylinder Heads will accept OEM components (rocker arms, valve covers, intake/exhaust manifold (2009+ only), head bolts, etc., we highly recommend that premium quality hardware be used with these heads.
- Recommended head stud kit: ARP #244-4300. NOTE: The factory head bolts are torque to yield and CAN NOT be reused. If not using ARP head stud kit, new OEM head bolts can be used following the factory torque sequence.
- Rocker Arm/Shaft/Pushrod Assembly: OEM or equivalent. Custom pushrod length will be required for some engines.
- Valve Covers: OEM or equivalent.
- Intake Manifold: OEM or equivalent.
- Exhaust: OEM or equivalent.
- Spark Plugs: OEM or equivalent.
- Gaskets: OEM or equivalent head gaskets, valve cover, intake and exhaust gaskets.
Combustion Chamber Volume:
- PN 61149/61159: 67cc
- PN 61109/61119: 73cc
- PN 61089/61099: 83cc
Intake Port Volume: 202cc
Exhaust Port Volume: 75cc
Valve Size: Intake - 2.165” Exhaust - 1.650”
Bare: cylinder heads are factory equipped with valve seats and guides.
Complete: cylinder heads start with the bare head and are finish assembled with 2.165” diameter intake valves, 1.650” diameter exhaust valves and high performance valve springs ready for installation right out of the box.
Instructions: Click Here
| Ech Ival Dia | 2.165 in |
|---|---|
| Series | Performer RPM |
| Grade Type | Performance |
| Quantity | Sold Individually |
| Camshaft Type | Hydraulic Roller |
| CARB Executive Order Number | D-215-119 (For 05-19 6.1L, 6.2L, and 6.4L Models) |
| Horsepower | 450-700 HP |
| Availability Note | Available to Order |
| Warranty | 12 Months |
| Seat Angle | Exhaust 45 deg/Intake 45 deg |
| Emissions Code | EO Number: D-215-119 |
| Hazardous Materials Warning |  WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Installation Notes |
|
| CNC Ported | No |
| Combustion Chamber Volume | 73 cc |
| Deck Height | 9.250 in |
| Deck Thickness | 0.625 in |
| Exhaust Valve Diameter | 1.650 in |
| Guide Plates Included | No |
| Intake Runner Volume | 202 cc |
| Material | Aluminum |
| Push Rod Diameter | (Suggested) Stock |
| Rocker Stud Diameter | 0.375 in |
| Valve Angle | Exhaust 16.8 deg/Intake 18.8 deg |
| Valve Spring Diameter | 1.066 in/ 1.300 in |
| Valve Spring Maximum Lift | 0.680 in |
| Valve Stem Diameter | 0.314961 in |
