The Gen III Hemi market is rapidly expanding, and the HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque camshafts available for these engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. The new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads. Organized into stages, these new options range from mild to wild! All HRT Stage 1 Camshafts are No Springs Required, which keeps cost down while still providing awesome horsepower increases over stock. Stages 2 and 3 applications work with COMP Cams Beehive and Conical Valve Springs, but COMP Cams is also introducing new HEMI Valve Spring Kits, engineered to produce the most power and RPM of any current options. Best average torque & power of any sub .600" lift Gen. IV HEMI cam tested. Runs great from 2500-6500 RPM. LST lobe profiles and #26918 valve springs allow 7000 RPM+.
Best average torque & power of any sub .600" lift Gen IV HEMI cam tested. Runs great from 2500-6500 RPM. Designed to work with #26918CC-KIT or #26918TC-KIT spring kit. Requires Phaser Limiter (5761) or Phaser Lock (5760)
- RPM Operating Range:1900-7000
- Cam Type: Hydraulic Roller
- Lifter Style: Hydraulic Roller
- Camshaft Series: HRT
- Stage: 2
- Valve Springs Required: Yes
- Camshaft Material: Billet Steel
- Advertised Intake Duration: 273
- Advertised Exhaust Duration: 279
- Intake Duration at .050 Inch Lift: 220
- Exhaust Duration at .050 Inch Lift: 230
- Intake Valve Lift: .596
- Exhaust Valve Lift: .582
- Lobe Separation: 114
