From real-time adjustments like enabling rock-lock or sway bar disable, to convenience settings like DRL configuration and disabling Auto Start/Stop, Flashcal+ is packed with features. Flashcal+ can stay plugged into your OBD-II port all the time, allowing for live functions to be enabled and used anytime. The apps built in Crawl Screen gives you quick and easy one-touch access to all of your most popular off-road functions. Our exclusive Tire Size Wizard will use your phones GPS to conpare the actual speed to what the speedometer is reading, and provide you with the perfect value to enter for an accurate speedometer! No more measuring roll-out or guessing! You get a perfect speedo reading in one-shot. 2007-2014 JK owners can upgrade to Flashpaq Tuning from within the app! Upgrades are available anytime, meaning there is power in your pocket! This all new Flashcal+ supports iOS and Android, awhile offering more capability and functionality than ever before. Available for 2007-2018 Jeep Wrangler JK, 2018-2024 Jeep Wrangler JL, and 2020-2024 Jeep Gladiator JT, including 3.0 Diesel models! Bypass module is included for use in JL/JT applications.
Works with 2.0L, 3.0L, 3.6L and 3.8L engines.
Features:
- Packed with Jeep specific features and options
- 07-14 JK can upgrade to full Flash Tuning for improved performance through the app!
- Throttle Booster upgrade available in-app, allows for adjusting throttle control!
- CRAWL Screen acts as a live and on-the-fly interface: Front and Rear Differential Lock, TPMS Adjust, Engine RPM idle up (CRAWL features vary by year and trim level of vehicle)
- Tire Size Wizard - Self-calibrates speedometer with your phone's GPS. No need to enter data manually, and you don't even have to get out of your Jeep. (You can still enter tire size by height the old-fashioned way if you want.)
- Live Data Monitoring with customizable gauge display, as well as reading and clearing trouble codes (CELs)
- Bluetooth connection from wireless dongle to Android or iPhone, and no wires to run
- Corrects speedometer for tire upgrades between 26”- 42”
- Speedometer recalibration for axle gear and T-case ratio, 2.73-5.38:1
- Axle Lock Front & Rear w/ trasfer-case in 4-Hi & 4-Low (CRAWL Screen, 3.8L JK Rubicon only)
- Engine idle up for winching, temporarily with CRAWL Screen, 500-2000 RPM
- Traction Control Enable/Disable
- Adjusts Daytime Running Light Location: Halo, Fender, Fog, High, Low, Turn Signal
- Daytime running light Enable/Disable
- Fog Light Enable/Disable
- Fog Light Drop Out Enable/Disable
- Front Swaybar Enable/Disable
- Horn Chirp on Lock Enable/Disable
- Enables blinker one-touch lane change
- Optional TPMS Disable, while using CRAWL Screen or completely for use with aftermarket wheels
- Adjusts TPMS Threshold adjust 22-56 psi.
- Calibrate speedometer for taller tires
- Program speedometer for gear ratio changes
- Set DRL configuration
- Tow package enable/disable
- Auto headlight enable/disable
- Accessory Delay - 0s, 43s, 5m, 10m
- Read/Clear Diagnostic Trouble Codes (DTCs)
- Tuning Options - 12-14 JK (Available after upgrading within app):
- 91 Octane Performance Tune (3.6L) - 15 RWHP/28RWTQ
- 87 Octane Performance Tune (3.6L) - 10 RWHP/15RWTQ
- Perf Crawl Tune (3.6L) - 10RWHP/15RWTQ
- MPG Booster Tune (3.6L) - Factory HP Level
- Cooling Fan - Set Target ECT 150°-230°
- Tuning Options - 07-11 JK (Avaiable after upgradcing within app):
- 91 Octane Performance Tune (3.8L) - 18 RWHP/23RWTQ
- 87 Octane Performance Tune (3.8L) - 15 RWHP/18RWTQ
- Perf Crawl Tune (3.8L) - 10RWHP/10RWTQ
- MPG Booster Tune (3.8L) - Factory HP Level
- Cooling Fans- Set on/off from 180°-230°
- Idle RPM - +/- 400 RPM
- Top Speed Limiter - up to 185 MPH
- Engine Rev Limiter - +600 RPM
