The Old Man Emu brand has its roots firmly planted in off road racing and draws its name from the emu’s ability to maintain great stability when moving over uneven terrain at high speeds. From humble beginnings in 1976, ARB purchased the company in 1988 and has continued to develop and test the products in Australia’s harsh 4WD environments.
Since then Old Man Emu has been an industry leader, pioneering the suspension industry with a promise that includes the latest technology, designed by top engineers to deliver products that are tailored to a customers needs.
Old Man Emu produces suspension to suit you, no matter your lifestyle.
When selecting front suspension components, constant load is the primary consideration to achieve desired lift and clearance, while ensuring proper geometry and ride comfort. Similarly, rear suspension selection should be based on the load the vehicle will consistently carry. Whether you're hauling gear, towing, or running a canopy setup, OME offers multiple spring rates to match varying weight demands as well as control arms helping you maintain performance, control, and stance under load.
Each kit is tailored to suit the specific vehicle and its intended use.
Most vehicles have multiple spring options available, each engineered to match specific vehicle setups and the accessories fitted. This ensures the right spring rate for your build, delivering a reliable lift within safe design limits.
- Side to side trimming requirement greater than 10mm use A/A fitment. Where near level rake is desired B/B fitment should be used. D22XL extra leaf can be fitted to CS034RA/B and CS035RA/B for heavier constant load carrying ability.
- A/B leaf springs have same spring rate, however the A springs are slightly taller for the side of vehicle which the driver sits. You can use either combination. If you want the vehicle to sit level side to side without passengers choose A/A or B/B.
- Leaf springs use Stock sized bushings and are not included.
- CS033RA is a 5+1 Leaf Pack, 168lb Spring Rate, 263mm Free Camber, 43.5mm Stack Height
- CS033RB is a 5+1 Leaf Pack, 168lb Spring Rate, 243mm Free Camber, 43.5mm Stack Height
- CS034RA is a 5 Leaf Pack, 148lb Spring Rate, 230mm Free Camber, 32.5mm Stack Height
- CS034RB is a 5 Leaf Pack, 148lb Spring Rate, 205mm Free Camber, 32.5mm Stack Height
- CS035RA is a 4+1 Leaf Pack, 137lb Spring Rate, 235mm Free Camber, 37mm Stack Height
- CS035RB is a 4+1 Leaf Pack, 137lb Spring Rate, 210mm Free Camber, 37mm Stack Height
- Models fitted with OE Up Country Suspension will only be raised by 20mm.
- OMEJGF10 front coil trim packer can be used for trimming or extra lift purposes, using no more than 1 packer.
- Fit XJGK01 Gearbox Packer Kit should a driveline vibration occur. Recommended unless using a SYE and Rear double cardon CV driveshaft.
