Get that Gen 3 Hemi engine swap started the right way, by using a fully engineered engine mounting system that provides maximum component clearances, ideal drivetrain geometry, and clearance for Hooker BlackHeart swap headers & 3.00" exhaust system.
The engine swap mounting brackets are designed to work with the modular transmission crossmember BHS525 (crossmember & transmission adapter brackets available separatly) to locate the engine in the optimal location for short runner valve clearance (eliminates firewall & brake booster modifications). Hooker BlackHeart swap headers BH2355, BH2366, or BH2375 & exhaust systems (BH2356, BH2357, BH2367, or BH2368) are designed as part of this system & provide clearance with all the transmission options.
These engine mounting brackets fit the K-member on trucks that originally came from the factory w/ a V8 or slant 6 engine. Mounts feature black finish & Include (2) engine mounting brackets, attaching hardware & instructions.
Features:
- Mount the Gen 3 Hemi Engine in your 1972-1993 Dodge D100/D150 2WD Truck
- Use w/ Gen 3 Hemi Engines 2003 & Up 5.7L/6.1L/6.2L/6.4L
- Superior Design That is Light Weight, Rigid and Has a Clean Appearance
- Optimal Engine Location Eliminates Firewall & Brake Booster Modifications
- Eliminate the Installation Guesswork and Compatibility Uncertainty That Comes with Using Universal/Adjustable Swap Plate Mounting Methods
- Fully Engineered Swap System that Provides Optimized Component Clearances and Drivetrain/U-Joint Operation Angles When Used w/ BHS525 Transmission Crossmember, Mid-length Headers, and Exhaust Systems (Developed Specifically for this Application)
- Welded Steel Construction w/ Black Finish for Durability & Corrosion Resistance
- Includes (2) Engine Mounting Brackets, Attaching Hardware & Instructions
Fits trucks that originally came from the factory w/ a V8 or slant-6 engine.
On the frame where the OE rubber mounts attached there should be two options, these mounts are designed to use the rearward frame-mounting hole for the OE rubber mounts. If not available on your frame you may be required to drill a new hole on each side for correct mounting.
Installation of these brackets requires the use of new OE style Dodge truck rubber mounts from your local parts store. Ex. Power Torque B2469
Installing a GEN3 HEMI into this vehicle will require the engine to have a rear sump oil pan. Ex. Mopar 4893207AA
