One of the challenges with a Gen 3 Hem swap is alternator clearance to the frame on the passenger side of the engine. The factory "car style" accessory drive system has the alternator mounted low & it gets into the frame in some applications (i.e. 1972-1993 Dodge D100/D150, and 1997-2004 Dodged Dakota swaps). This alternator relocation kit mounts the smaller Holley alternator (197-302) low and inward for extra clearance. Fits Gen 3 Hemi engines with VVT & "car style" factory accessory drive systems. Steel bracket construction with black powder coated finish. The Holley alternator is smaller & shorter than other alternators and is easy to wire. The Holley alternator that is included with this part does not require the factory Mopar ECU to excite the alternator, so it can be used with any engine control system (i.e. Terminator X, Dominator, and HP EFI systems).
Features:
- Relocation Kit Mounts the Alternator low & Inward for Added Clearance in Gen 3 Hemi Engine Swaps
- Includes Small & Short Holley Alternator (197-302)
- Bracket is Black Powder Coated Finish – for Corrosion Resistance
- Alternator – 150 Amp Output w/ Natural Aluminum Finish
- Easy to Wire w/ only 2-Wires & Ground Connection
- Steel Construction for Strength & Resistance to Flex
- Provides Passenger Side Frame Clearance on 1972-1993 Dodge D100/D150, and 1997-2004 Dodge Dakota Gen 3 Hemi Swap
- Fits VVT (Variable Valve Timing) Gen 3 Hemi Engines w/ the “Car Style” Factory Accessory Drive System (2009 & Up 5.7L & 2011 & Up 6.4L)
- Includes Mounting Bracket, Pulley, Alternator & Hardware For Installation
Fits Gen 3 Hemi Engine with VVT & "Car Style" Accessory Drive System (2009-up 5.7L, and 2011-up 6.4L SRT engines).
This Alternator relocation kit is recommended for use with the Holley swap system on the following vehicles: 1972-1992 Dodge D100/D150 1997-2004 Dodge Dakota
