Each Cam is specially designed, or we should say redesigned, to work better than any other manufacturers cams on the market with the New MDS HEMI. We examined all of the driveability issues and our new redesign addresses all of the problems with the current aftermarket cams including the idling and roughness that have previously been unavoidable. We're extremely confident that our Stage 1 HHP Racing Cam will beat the competition in power and performance.
All of our Stage 1 cams are designed to work without the need for computer tuning, saving you hundreds of dollars, though we expect even larger gains will be seen with all of our cams if combined with tuning. Our dyno output of 344 rear wheel horsepower, which is the equivalent of 419 horsepower at the crank, was seen when this cam was combined with a Superchips tuner, a full exhaust system and a performance air intake. That's just shy of SRT-8 Power!
Specifications:
- Tappet Lift at 0.006 Duration: 260/Intake & 264/Exhaust
- Valve Timing at 0.050 for Intake: 11-/Open & 39/Close
- Valve Timing at 0.050 for Exhaust: 41/Open & 9-/Close
Dyno Numbers: 40 Horsepower Rating
Installation of this camshaft in a 5.7 require 6.1 Push Rods or milling of the heads .030 due to the differences in the base circle of Comp Cams core.
