Upgrading your 6.2L SUV's rear differential to the IMS 8000 Billet 9" or similar rear end and need to remove the factory ELSD from your vehicle's computer system? We have you covered! Working with Mo-Power Calibrations LLC we've developed the bench software and built the required harnesses to perform the removal of the ELSD from your vehicle's configuration. Available only through HHP, we are able to remove the ELSD and prevent the unit's feedback from affecting the other controllers in the vehicle allow for normal operation of the AWD system and Transmission.
Steps:
- Purchase Our ESLD Removal Service
- If using a handheld based tuning system such as Diablosport, restore your vehicle back to stock.
- Disconnect Battery and remove the BCM and DTCM from your vehicle (Instructional Video to Follow Shortly)
- You will receive a prepaid UPS label (for US Customers Only) to send in the required modules. Package your BCM and DTCM extremely well in water-tight packaging, with protective padding a minimum of 2" around the outside of each module and between the modules.
- Ship your modules using the prepaid UPS Label.
- Due to the extensive time it takes to complete the custom reprogramming, ELSD module work is completed only on Saturdays.
- Modules will be shipped back via 2 Day shipping on Monday (Holiday exclusions may apply)
- Reinstall modules and reconnect battery.
- If using a handheld based tuning system, reinstall handheld and use the new original backup file to continue tuning. If using laptop based tuning systems, make a fresh pull of your vehicle's tunes and use these moving forward.
