- Drop in pump assembly for Hellcat Charger and Challenger
- Use with OE fuel feed outlet, or with upgraded feed line directly off pump module
- No control support (modulation or regulation): see our complete Hellcat fuel systems or use at your own risk
- E85 and race fuel compatible
- Return port is plugged for returnless setups (see 69-800 for return configurable pump module)
- May be converted to return use by capping off the OE feed outlet (passenger side) and adding external regulation, feed, return lines, etc.
Passenger side OE Feed Outlet Option
- Open: use if you wish to neglect post filtration, connect to OE feed line and send 70-micron fuel to injectors (not recommended)
- Cap for OE outlet: use if you wish to use the external feed port directly on the pump module.
- AN-8 Male: adapts outlet of OE feed outlet to AN-8 male
- AN-10 Male: adapts outlet of OE feed outlet to AN-10 male
NOTES ON RETURNLESS CONFIGURATION
- Pressure regulation and flow output is [in car] electronic, so performance troubleshooting must be accomplished by the tuner and/or installer. (we cannot support)
- In-tank fine filtration is removed, so external, inline fine filtration must be added for the safety of the injectors. A second OE FPDM must be used and implemented to drive the second pump.
- Use 33-029 to adapt OE rail inlet to AN-8 Male
- Use 33-030 to adapt OE rail inlet to AN-10 Male
For 2015-2023 SRT Hellcat (not Demon, SRT or R/T models)
Applications:
- 2015-2023 Dodge Challenger SRT Hellcat
- 2015-2023 Dodge Charger SRT Hellcat
