The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads. Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit. Best camshaft for larger blowers and more race oriented builds. Dyno tested to 7500+ RPM (Req DOD delete & 7228 springs).
Best camshaft for larger blowers and more race-oriented builds. Dyno tested to 7500+ RPM. Requires DOD Delete Kit & #7228 valve springs.
Specifications:
- RPM Operating Range: 2,000-7,000
- Cam Type: Hydraulic Roller
- Lifter Style: Hydraulic Roller
- Camshaft Series: HRT
- Stage: 2
- Valve Springs Required: Yes
- Advertised Intake Duration: 287
- Advertised Exhaust Duration: 299
- Intake Duration at .050 Inch Lift: 229
- Exhaust Duration at .050 Inch Lift: 241
- Intake Valve Lift: 0.635
- Exhaust Valve Lift: 0.635
- Lobe Separation: 117
