BWoody Track Hawk Velocity Plus Intake 2019-2022
NOTE: Does NOT fit 2018 models, see 510.4001
Kit includes:
- x1 BWoody intake tube
- x1 Custom 5" filter (Color may vary)
- x2 Worm gear hose clamps
- x1 Reducing silicone coupler
- Detailed instructions.
Flow bench results:
OEM intake - 1179.9 CFM @ 28" of water
BWoody Velocity Plus intake with dry charger - 1970.6 CFM @ 28" of water
BWoody Gain - 790.7 CFM!!!!!!!!!!!
NOTE: May require a custom tune for optimal performance gains. // Disclaimer: This product is for intended for off road use only.
IAT Harness:
BWoody IAT MAP Harness is used to prevent an intake over temperature code.
This code has been reported by customers whom reside in warmer areas of the country. (Dry heat)
Original purchasers of this intake can call to order harness separately if needed.
Ram Air Shield:
- Designed so that the opening at the front of the shield will capture the incoming cool air while the angled side towards the rear of the shield will help evactuate hot air downward from your engine bay.
- Effecively lowering IATs approximately 2-4 degrees under normal driving conditions.
- Shields available in Wrinkle Black only
Powdercoat Information:
Standard colors are silver and wrinkle black, couplers are black.
If you wish to have a custom color please choose in the drop down boxes below.
NOTE: Anodized colors / Two stage colors tend to have heavy coating on flat surfaces.
*** We Do Not Color Match ***
