You are purchasing a BRAND NEW custom manufactured and flow-matched set of Bosch, standard length, 1200cc EV14 fuel injectors - Priced right at $115 each. Each set is delivered with a flow data card showing the individual flow rates for each matched injector, resistance, and latency value at 14 volts. Use for super street or racing, single or multi-valve, naturally aspirated, forced-air/exhaust induction engine applications using pump and racing gasoline or most green fuels. This is a high performance, high volume fuel injector. These Bosch injectors have been highly modified and flow-matched to specific specifications. The fuel delivery is from a single-hole disc. - Wide cone-shape spray pattern for maximum fuel atomization. High resistance, no inline resistors or resistor box requires for use. You may need extenders and pigtails for your installation. Both sold separately, (See Photos). This set of injectors has been tested and will function at rail pressures in excess of 130 psi, 9 bar. Excellent low pulse width response with predictable response. Excellent atomization for modern multi-valve engines. This set will require no more than a 1% trim for easy tuning.
- Fuel injectors have been tested and will function at rail pressures in excess of 116 psi, 8 bar.
- Low pulse-width balancing with predictable response
- Excellent fuel atomization for modern multi-valve engines.
- This set will require no more than a 1% trim for easy tuning.
- Injector type: EV-14, saturated
- Fuel Nozzle: Single-hole disc, with diffuser plate - Maximum atomization.
- Total Length: 2.50 inches, 65.5 mm
- Fits Iridium fuel rail
- O-rings: Viton, top and bottom, 14.5 mm
- Resistance: 12.5 Ohms (high impedance, no inline resistors or resistor box requires for use)
- Stainless steel construction, rated ALL-fuels
