The TPMS LINX Bluetooth Module can easily be installed in any vehicle with a 12v power supply to wirelessly monitor a vehicle and up to 3 separate trailers on LINX utilizing already available ARB TPMS tire sensors. ARB LINX TPMS Communication Module; Reads and Displays Data from ARB TPMS Sensors (additional hardware required).
Hardware includes:
- TPMS Repeater - 7450120
- TPMS Trailer Repeater Power Kit - 819109
- TPMS 4 Sensor System - 819104 (external)
- TPMS 5 Sensor System - 819103 (internal)
- TPMS 2 Sensor Trailer System - 819106 (internal)
- TPMS 2 Sensor Trailer System - 819107 (external)
The LINX TPMS Module should be positioned in a fairly central location in the vehicle, equidistant from all wheels. This will ensure the best performance from all TPMS tyre sensors. Under the armrest center console is a typically good location. It is a central location and in most vehicles, it also has a 12VDC outlet which can be used to power the module.
Secure the LINX TPMS Module in place using at least one of the screws mounting tabs or using cable ties. Test for a 12VDC circuit that turns on when the vehicle key is the ACC or ON position. The circuit must also be off when the vehicle key is in the off position, hence not a permanent battery connection or else the module will continue to draw power from the vehicle battery when the vehicle is turned off.
Connect the RED wire to this circuit using a suitable method such as an insulated wiretap or solder and tape. A 12VDC power outlet or cigarette lighter socket provides this functionality and is the ideal place to piggyback power from.
Connect the BLACK wire to a vehicle ground.
To connect the LINX TPMS Module to the LINX Display refer to the instructions in the latest LINX Operation Guide.
