A1000 Performance Plus Advanced Technology
- The A1000 performance you expect and more:
- Fuel Injected Engines: GAS
up to 1300 FWHP – naturally-aspirated
up to 1000 FWHP – forced air induction
- Carbureted Engines: GAS
up to 1500 FWHP – naturally-aspirated
up to 1200 FWHP – forced air induction
- Fuel Injected Engines: E85
up to 910 FWHP – naturally-aspirated
up to 700 FWHP – forced air induction
- Carbureted Engines: E85
up to 1050 FWHP – naturally-aspirated
up to 840 FWHP – forced air induction
- Fuel Injected Engines: GAS
- Lighter than the traditional A1000 pump.
- Reduced current draw at higher, EFI pressures.
- Extended service life in methanol and ethanol.
- Integral, external brushless controller for a clean installation, cooler fuel, and enhanced reliability.
- Quieter than the traditional A1000 pump.
- ORB-10 inlet and outlet ports.
- Requires straight 12-VDC to the 16-VDC power supply.
- Aeromotive Brushless pumps are not designed for use with 16v charging systems, typically operating in the 16-18v range. If you are running a 16v charging system, the use of a voltage regulator or step down to typical 12v charging system voltages will be necessary.
- Not compatible with pulse-modulated systems or fuel pump speed controllers.
- Includes 2 ea. P/N 12703 stainless steel t-bolt clamps for mounting.
- EFI rated flow of 700 lbs./hr. @ 45 psi, 13.5 volts
- Carb rated flow of 900 lbs./hr. @ 9 psi, 13.5 volts
20" W x 10" H x 18" L