null

GForce MOP10107A Outlaw Axles for 15-23 Challenger, Charger SRT, SRT Hellcat & Scat Pack

Product Code: MOP10107A
(No reviews yet) Write a Review
Share:
$2,199.00
Availability:
Call for availability.
High Horse Performance is Veteran Owned & Operated
Description

GForce Engineering OUTLAW Axles are a direct replacement for factory half-shafts and are designed for cars making big power and/or with serious demands on their driveline. 

All 15+ Mopar axles are designed to work with the factory 32 spline SRT, Hellcat, Demon, RedEye, and 1320 differential, along with the 35 spline wheel hubs.

All Mopar axles will require you to swap the factory ABS ring onto the GForce Axles!

All Mopar platforms have a less than ideal axle angle from the factory. These axles are not intended to use on lowered cars! While our CV’s are considered a wear item, it is worth noting that CV assemblies and boots will see accelerated wear or possibly binding and clearance issues with lowered cars, so we strongly suggest to avoid lowering these cars.

The boot location with the factory shock is already tight on clearance. We suggest to loosen the upper mount to try and shift the shock body away from the axle to help gain any additional clearance if necessary. Aftermarket shocks or coilovers may not clear and require aftermarket shock mounting solutions.

Our average customer with the combined 15+ platforms is around 800-900hp, with a considerable number of cars well beyond that, including some record breaking cars pushing upwards of 1500hp in near full weight vehicles. The OEM rear end should never be considered reliable for this power level as many of the customers running at that level are going through multiple differentials. The 15+ Modified Mopar 9” conversion kit helps address the axle angle issues present from the factory and also gives you a stronger rear end to work with. At the heavier weight of this platform, we are really asking a lot of the axles to support the higher levels of torque and weight, so it is critical that the car should be dialed in with the suspension setup and proper torque management when leaving the line.

Features:

  • Anti-Wheel Hop Technology
  • Direct Bolt-In Fit and Finish
  • Isotropic Surface Finish on CV’s and CV Internals
  • Upgraded Premium CV Fasteners
  • 1-Piece Inner and Outer Stubs
  • Aircraft Grade Certified Alloys
  • CNC-Machined
  • Powder Coated Axles For Corrosion Protection
  • Black e-coat finish on inner and outer stubs to protect against harsh conditions without impeding spline engagement

Getrag Differential. Requires 32 Spline Hubs.