The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads. Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit. Perfect Choice for 5.7L Eagle or 6.4L Apache with 2.5L and smaller blowers while keeping limited phaser control for off idle response. (Requires DOD Delete, 26918 Springs & Phaser Limiter)
Perfect choice for 5.7L Eagle or 6.4L Apache with 2.5L and smaller blowers while keeping limited phaser control for off idle response. Requires DOD Delete Kit, #26918 valve springs & phaser limiter.
Designed to work with #26918CC-KIT or #26918TC-KIT spring kit. Requires Phaser Limiter (5761) or Phaser Lock (5760)
Specifications:
- RPM Operating Range: 1,800-6,600
- Cam Type: Hydraulic Roller
- Lifter Style: Hydraulic Roller
- Camshaft Series: HRT
- Stage: 1
- Advertised Intake Duration: 279
- Advertised Exhaust Duration: 291
- Intake Duration at .050 Inch Lift: 221
- Exhaust Duration at .050 Inch Lift: 233
- Intake Valve Lift: 0.594
- Exhaust Valve Lift: 0.594
- Lobe Separation: 116
