Effectively reduce your wheel hop & diff movement with our differential braces!
BWoody Front Differential brace - Choose your Style 510.4020 or 510.4040 (Refer to Pictures for Proper Selection)
- The front differential of the Trackhawk has a fairly significant amount of movement where the front driveshaft attachs to the front differential. We have effectively reduced the up and down movement in this location by 75% - resulting in much less wheel hop and a much firmer launch.
BWoody Rear Differential brace:
- Made from 1/4" A36 Steel
- Polyurethane Bushings - Can upgrade to Delrin for extra strength below!
- All Mounting hardware included
- Reduces up to 95% of wheel hop when paired with our upgraded suspension package
- Tools Required (Not included):
- 10mm Socket
- T-55 TORX Bit
- 12mm Allen Wrench
- 25/64 Drill Bit
Front Diff Brace Options: The image shows the mounting holes required for Part #510.4020 - You can check this by turning your steering wheel all the way to the left, you will be able to get a good view of your front differential from the passenger side of the vehicle. Part #510.4040 Does not require these mounting holes, it is mounted by drilling a hole into the differential.
